HD Retrovision - Wii / Wii U Component Kabel

Get the best analog video and audio out of your Wii or Wii U with this high quality, fully shielded cable.
Don't settle for cheap unshielded cables that cause poor video quality and audio interference issues.
Use these high quality cables to connect your Wii or Wii U console to the YPbPr component video inputs on your TV or other video devices.

These cables have been designed and engineered so that your Wii or Wii U console can deliver the best possible analog video and audio signal.
The fully shielded design eliminates audio and video crosstalk, while the 75 ohm impedance effectively transmits the entire video signal even at 1080p resolutions.

WARNING for Wii consoles

Certain Virtual Console titles require that your TV or monitor support “240p” (NTSC / 60Hz regions) and / or “288p” (PAL / 50Hz regions) through the YPbPr inputs.
Read here how to test the function of your screen in the scenario described.

We do not accept returns due to 240p incompatibility of your device. If you have any questions, contact us before purchasing.

Not compatible with the Wii mini RVL-201.

cable specifications

∙ Length: 1.8 m nominal
∙ Impedance: 75Ω nominal
∙ Shielding: aluminum Mylar with copper spiral
∙ RoHS compliant

Video standards supported by Wii

∙ CEA-770.2-D (240p60, 480i60, 480p60)
∙ ITU-R BT.1700 (288p50, 576i50)

Video standards supported by Wii U.

∙ CEA-770.2-D (480i60, 480p60)
∙ CEA-770.3-E (720p60, 1080i60)
∙ ITU-R BT.1700 (576i50)
∙ SMPTE 274M (1080p60)

NOTE: 60 means both 60 Hz and 59.94 Hz.

"HD Retrovision", "HDRV", "HD Retrovision Bringing Retro Gaming Into The High Definition Era" are registered trademarks of HD Retrovision LLC.
All photos of HD Retrovision products are copyrighted by HD Retrovision LLC.