Retrotink - HD15 to SCART Cable

Specifications

• HD15 (VGA) plus audio (3.5mm) to SCART
• Impedance controlled 75Ω mini-coax for all video signal lines: Red, Green, Blue, Sync
• Shielded audio to minimize AV crosstalk
• Global shield over entire bundle to minimize noise pickup
• Double shielded cables (individual shielding per signal plus global shield)
• The 470Ω attenuation resistor on SCART Pin 20 to safely bring 5V TTL sync to video levels
• 6ft length

Cautions

• The 470Ω sync attenuation resistor is for use only with sources that output 5V TTL level sync
• The cable does not have a sync combiner - a valid composite sync signal must be present on HD15 Pin 13
• SCART is directional - this cable is for sending a video source into the HD15 connector and out to the SCART connector
• There is no signal conversion - it will not scale high resolution VGA computer sources to standard definition TV